Mold Removal in Murfreesboro, TN
You can call to discuss mold removal for a home, rental, or business in Murfreesboro.
- Moisture source checked first
- Containment and HEPA filtration
- Homes, rentals and businesses
Local Factors for Mold Removal in Murfreesboro
Housing numbers tell you about the locality, rather than the state of your property. Base your plans for records, access and moisture repairs on assessment results.
Census ACS 2024 5-year (tables B01003, B25003, B25035, B09021 and B25024). Area estimates do not establish conditions at an individual property.
In Murfreesboro, 28 percent of residents aged 65 or older live alone. Record visible damage, note when you first saw it and share any available leak repair records.
The median year built for housing units in Murfreesboro is 2002. This does not establish your building age or condition. For your property, record the rooms affected and ask who can authorize access before work begins.
Single-family units make up 62 percent of all housing units in Murfreesboro. Ask which rooms need to be accessible and where belongings can go during the assessed work.
In Murfreesboro, renters occupy 48 percent of occupied housing units. Ask which rooms need to be accessible and where belongings can go during the assessed work.
Local Mold Facts for Murfreesboro
- License: The Tennessee Board for Licensing Contractors lists Mold Remediation (S-F) as a specialty classification in its contractor license outline. Homeowners can verify a contractor's license on the board's website and ask what license applies to their job.
- Disclosure: Under Tennessee Code 66-5-202, owners of one to four unit residential property must give buyers either a property disclosure statement or a disclaimer. A disclaimer is allowed only when the buyer waives the disclosure.
- Renters: Renters should report leaks and visible mold to the property owner in writing and keep a copy.
- Agency: The Tennessee Department of Health Healthy Homes page gives tips on preventing mold and moisture and links to EPA and CDC mold guidance, including flood cleanup advice.
State guidance: Tennessee Board for Licensing Contractors, Contractor Classification Outline; Tennessee Board for Licensing Contractors, home page; Tennessee Code 66-5-202 (Internet Archive copy of Justia); Tennessee Department of Health, Healthy Homes
Mold Removal: Scope and Purpose
During mold removal, the moisture source is located and the affected area contained; uncleanable materials are removed and salvageable materials dried.
Related types of work include mold cleanup, mold mitigation, mold remediation and mold abatement. Your scope should tackle the underlying water intrusion or humidity issue as well as damp materials and visible mold growth.
Mold removal in Murfreesboro starts by finding and fixing the moisture source. The affected area is contained, damaged porous material may be removed, and remaining surfaces are cleaned and dried. Larger areas, HVAC systems, and growth linked to contaminated water call for professional help.
If your concern crosses a shared wall, ask who can authorize access on both sides and document which rooms need assessment.
- Visible growth or a musty odor
- Behind walls or floors, hidden moisture
- Mold near HVAC equipment
- Harm left by a flood or leak

Compare Mold Remediation Companies Serving Rutherford County
Use Independent Clearance Testing
An independent assessor can perform any needed post-remediation verification so the company doing removal does not also check that work.
Ask for a Clear Scope of Work
The scope should identify containment, affected materials, cleanup, drying, repairs and factors that can change the price.
Start With the Moisture Source
Ask how the leak, condensation or humidity problem will be found and corrected.
Residential Services With Commercial Mold Removal in Murfreesboro
Rentals and Apartments
Units plus shared buildings, taking plumbing and access into account.
Learn moreBrowse All 44 Mold Cleanup Services for Murfreesboro
Select the mold service that fits the signs on your property. Call for help choosing a page when you are uncertain about the fit.
Mold Removal by Area of the Home
- Basement Mold Removal
- Floor and Subfloor Mold Removal
- Wood Framing Mold Removal (Joists, Studs, Rafters)
- Garage Mold Removal
- Crawl Space Encapsulation
- Bathroom Mold Removal
- Closet Mold Removal
- HVAC and Air Duct Mold Removal
- Ceiling Mold Removal
- Insulation Mold Removal
- Attic Mold Removal
- Wall and Drywall Mold Removal
- Kitchen Mold Removal
- Crawl Space Mold Removal
Mold Removal Methods
Mold Inspection and Testing
Mold Removal Cost Guide
Preparing to Contact Mold Removal Professionals in Rutherford County
Avoid disturbing growth, save useful documentation and, if you can do so safely, stop the water.
Call (844) 352-3560- Stop the water safely. Shut off a leaking fixture or arrange a repair. Keep clear of wet electrical equipment and standing water.
- Limit access. Keep the door shut if possible. Keep visible growth out of reach of children and pets.
- Avoid spreading particles. Containment is needed before you brush, scrape or sand mold. Stop running HVAC equipment when mold may be inside.
- Photograph the damage. Record the leak, visible growth and damaged items before anything moves. Check with the insurer about required records.
Mold Remediation, Step by Step
These mold remediation steps follow this order: assess the area, contain it, remove damaged material, clean, dry and verify the work, then take containment down.
Mold Inspection and Moisture Mapping
A moisture meter and, when useful, a thermal imaging camera help trace the moisture source and affected materials.
Containment and Air Filtration
Build your containment barrier using poly sheeting. Clean rooms receive fewer migrating particles with negative air pressure and an air filtration device, the HEPA air scrubber.
Removal of Damaged Materials
Protective equipment is used by workers. Damaged porous materials may require demolition, including drywall removal.
Surface Cleaning and Drying
Clean remaining non-porous surfaces through damp wiping and use of a HEPA vacuum. Air movers, a dehumidifier and moisture readings guide drying.
Final Cleaning and Verification
Post-remediation verification can involve clearance testing, a visual examination or air sampling, carried out by an independent assessor.
Understanding Mold Removal Cost in Murfreesboro, TN
According to Fixr, the typical nationwide range for mold remediation is $1,500 to $9,000. It gives a professional rate of $10 to $30 per square foot when areas exceed about 10 square feet. What you pay reflects materials, repairs, the affected area, drying and containment.
Typical National Mold Remediation Range
$1,500 to $9,000Source: Fixr, Mold Remediation Cost (checked 2026-10-23)Professional Pricing When Areas Exceed About 10 Square Feet
Each Square Foot Costs $10 to $30Source: Fixr, Mold Remediation Cost (checked 2026-10-23)Two Samples and Laboratory Testing With a Typical Inspection
$450 to $800Source: Fixr, Mold Inspection Cost (checked 2026-10-23)Mold Removal in Tennessee: Insurance Coverage and Payment
Insurance coverage varies with moisture cause and policy terms. Sudden water events covered by your policy may qualify, but humidity, neglect and persistent leaks commonly have limited or excluded coverage.
Renters and Landlords in Rutherford County
Renters should report leaks and visible mold to the property owner in writing and keep a copy.
Property Disclosures
Under Tennessee Code 66-5-202, owners of one to four unit residential property must give buyers either a property disclosure statement or a disclaimer. A disclaimer is allowed only when the buyer waives the disclosure.
Homeowners Insurance and Mold Removal
Find out whether a mold sublimit applies and the water event qualifies for coverage, plus what an insurance claim requires before material removal.
Find a Mold Removal Service in Murfreesboro
Call any hour. You can speak with a mold cleanup specialist about your property's next steps.
Find Mold Removal Services Near Murfreesboro
Common Mold Cleanup Questions
Can mold return after removal?
Yes. Mold can return if a leak, condensation or humidity problem remains. Include identification of the moisture source and an explanation of drying and moisture control in the remediation plan.
What should you check to find mold in your house?
Search for a musty odor, visible growth and evidence of moisture by HVAC equipment, windows, plumbing and roofs. A mold inspection can trace damp material. Mold testing is not always needed when growth and its water source are clear.
How long does mold remediation take?
The affected area, drying, material removal and fixing the moisture source determine how long it takes. Before starting work, ask about the order.
Does black mold need a different process?
You cannot judge mold risk from color alone. Use the affected area and moisture source, plus material and containment needs, to shape your removal plan.
Under what conditions is professional mold removal suitable?
EPA guidance suggests professional help when your HVAC system is affected, water damage is extensive, areas exceed about 10 square feet, or water involves sewage or contaminated water.
Talk to a Mold Remediation Company Serving Greater Nashville
You can reach someone by phone 24 hours a day, even on holidays and weekends.